7
Connecting optical fibers
Insert the transceiver module into the fiber port. Identify the Rx and Tx ports on the
transceiver module. Use the optical fiber to connect the Rx port and Tx port on the
transceiver module to the Tx port and Rx port on the peer end, respectively.
将光模块缓慢插入光接口插槽，确认光模块的
Rx
和
Tx
口，将光纤一端的两个
LC
型连接器分别
插入
Rx
和
Tx
口，再将光纤另一端分别插至对端设备的
Tx
和
Rx
口。
1
2
Copyright © 2022, New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
Copyright © 2022
新华三技术有限公司 版权所有，保留一切权利
本文档中的信息如有更改，恕不另行通知
如需了解产品及安装方面的更多信息，请登录
H3C
网站
www.h3c.com
Connecting the console cable
Console
To use a console cable to connect the console port on the device to a PC, connect the DB9
connector of the console cable to the RS-232 port on the PC first and then connect the RJ-45
connector of the cable to the console port on the device. If the PC does not have an RS-232
port but a USB port, use a USB to RS-232 adapter for the USB port.
PC
通过
Console
口电缆与设备连接时，应先连接
Console
口电缆的
DB9
端到
PC
的
RS-232
接
口，再连接
Console
口电缆的
RJ45
连接器到设备的
Console
口。当
PC
没有
RS-232
接口
只有
USB
接口时，需要使用
USB
转
RS-232
转接器连接到
Console
口电缆。
Device list
Mark (printed on the front panel)
Product code
RT-ICG2000H
RT-ICG2000H-DC
H3C ICG2000 Series
RT-ICG2000D
RT-ICG2000D-EI
