1
2
3
Method 4
Connecting the power cord for a DC power module
2
1
2
Copyright © 2019, New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
Installing an interface module
1
2
2
1
3
4
1
2
An LSPM6FWD interface module installed on the device adds 75 mm (2.95 in) to the
chassis depth.
This section is applicable only to switch models that support expansion cards.
To avoid damage, do not touch the electronic components on an expansion card.
Various types of expansion cards Are available for the switch. The installation method varies by
expansion card type. Select an installation method as required.
Make sure each slot has a module or filler panel installed when the switch is operating.
Remove a filler panel
Install an expansion card (method 2)
Install an expansion card (method 1)
9
Method 3
1
2
1
2
3
Method 2
