H3 System H3G-650, Инструкция по эксплуатации

Страница: 9 / 12

i. LOG_PATH=C:\gprs\log <= Log file path
ii. DATA_PATH=C:\gprs\data <= Data XML file path
iii. PORT=65001 <= TCP/IP port
D. Change of configuration
i. Stop the corresponding windows service
ii. Change the configuration file, gprs_config.ini
iii. Re-start the windows service
E. To start the windows service: At “Windows Service”, select “DataCollection_GPRS”
and run.
2) Data files and communication log files
A. Data XML files will be generated at the folder defined at “DATA_PATH.”
B. Log files will be generated at the folder defined at “LOG_PATH.”
C. Examples
Ex) Data XML file name: H3_20101004194422_1111111111.xml
Creation logic of xml file name: Da gateway serial no
Ex) Log file name: H3_20101004194422_156.log
Creation logic of log file name: Datetime
6. XML file
<? xml version = " 1.0 " encoding = " utf-8 " ?>
< Measure serial = " 1111000002 " dc = " 1 " battery = " 1.2 " >
< Info servertime = " 20111221132941 " gwtime = " 20111221132941 " sim ="310260760561444 "
fw ="H3G-700 v1.0.28" signal ="99,99" />
< Device type = " Pressure_AND " >
< Data id = " 5080600120 " measuretime = " 20111109132941 " sys = " 155 " dia = " 98 " pul = " 77 "