H2O TriniT, Сборка и инструкция

Страница: 9 / 10

Step 4 - Check For Leaks
Step 5 - Prepare For Test
1: Open valve in water line.
3: Turn faucet off. Check for leaks.
2: Turn boiling water handle on to fill tank (about 1 minute). When tank is full,
water will flow from faucet , as shown in Figure 4.
1:Plug electrical cord into a grounded 3-prong outlet.
2: Turn on the button on the right, then set the temperature to 98°C/90°C ,
98°C/90°C will be reached in about 10 minutes, as shown in Figure 5.
The green light indicates that the water is boiling , the red light indicates
that it is heating.
Figure 5
Figure 4
Tank
98 °C
OFF
OFF
ON
90 °C