-
4 -
|
P a g e
Unpacking
International H2O Inc. products are shipped completely
assembled and ready to operate. Remove the top of the box and slide the
water cooler out and save the box and packing materials.
Inspection
Inspect the cooler for shipping damage. Look at the exterior panels
to see if they have been dented or damaged. Check the dispensing
spigots in the front. Open the bottom panel to assure that the filter
system is in tact. Look at the back of the cooler to see if the compressor
is secure and has not broken from the mounting. Inspect the filter
system to see that nothing is damaged or dislodged from shipping.
Description (Model H2O-750)
The Model H2O-750 provides water at two temperatures. The
water is dispensed from two spigots—one “hot” and one “cold.” The
assembly drawing is shown in Figure 1 for the H2O-750 and Figure 2 for
the H2O-1000. Water flows from the filter system into the top tank, also
known as the cold water tank. This tank then feeds the hot tank that is
heated by internal heaters. The level in the cold water tank is controlled
by a float valve mechanism. This mechanism controls a solenoid valve
on the water feed line to maintain a constant level of filtered water. Both
models are available with reverse osmosis (RO) or standard filter (F)
versions.
The water production flow chart is shown in Figure 3.
Description Model H2O-750
