7. Removing the Earbuds
At this point the neckwrap is removed, and is recommend you store it out of
the sun with the wire clip.
4.
Remove the wire clip from the back of the neckwrap and gently pull
the wire away from the track.
3.
Repeat Steps 1 and 2 for the other side.
2.
Pull the wire through the opening on the end of the earclip.
Pull the earbud straight down through the end of the earclip.
1.
In some situations, the neckwrap is not desired, such as under a swim cap.
For these situations, we have designed the Earbuds to be removable. To
remove the Earbuds, perform the following steps:
The neackband features adjustable earclips that can be extended for
larger sizes, and retracted for smaller sizes. The earbud can also be
moved up and down to create a comfortable fit directly into the ear
canal.
1.
2.
The speaker arm rotates within the ear-clip, allowing you to channel
the audio output directly into the ear-canal.
The main adjustments in the headset are made in the ear-clip portion of the
headphones.
6. Adjusting headphones
5. Wearing the H2O Audio Underwater Headphones
3.
Follow the next 2 sections to adjust the fit ideally for your head.
2.
The ear-clips are designed to fit over the top of the ears, with the
speaker arm angling into the ear canal from the top / front of the ear,
as shown above.
Bring the headphones behind your head, and spread the neckwrap
apart as you position the ear-clips by your ears.
1.
The H2O Audio Underwater Headphones feature a 'behind-the-head' design
that provides a secure and comfortable fit during the most active sporting
activities. Follow these simple steps to put the headphones on your head.
3. Introduction
The H2O Audio Underwater Headphones provide audio directly into the ear
through a waterproof speaker assembly at depths of up to 10ft.(3m) when
coupled with the H2O Audio Waterproof Case.
The headphones include watertight speakers, made for complete submersion
and designed with an adjustable frame to stay secure during the most active
watersports. The headphones feature a 3.5mm stereo plug compatible with
most portable audio systems.
Compatibility:
These headphones are compatible with any digital audio player
featuring a standard 3.5mm stereo jack. When used with a system other
than a H2O Audio Waterproof Case, the depth rating will be limited to that
of the audio player or 10ft.(3m), whichever is less.
CAUTION:
These headphones insert directly into the ear, and are not to be
used during SCUBA diving. Prolonged exposure to pressures at depths
beyond 10ft.(3m) may result in permanent hearing loss. Discontinue use
at the first sign of pain or discomfort.
Before using the headphones it is recommended you perform an audio test.
1. Plug the headphones into a standard audio jack and verify that audio is
audible through both speakers.
2. At full volume, the speakers should play at a volume that is
uncomfortable when played directly in the ear.
3. If your headphones are operating normally, there is no more to do.
4. If your headphones are operating at very low audio levels, it is possible
that a vacuum has formed in the speaker chamber due to exposure to low
pressure, such as in air travel.
5. Playing the headset at 90% volume for an hour typically solves this
problem. If not, please contact H2O Audio Customer Support.
4. Audio Test
2. Headphone Features
Waterproof
Speakers
Coiled cable
eliminates tangles
Adjustable Ear-clips
Removable
Neckwrap
Removable
Earbuds
Printed Instructions
H3 Waterproof Headphones
Before using this system, please be sure to read, understand, and follow the instruction of this manual.
www.h2oaudio.com
H3-70 20070817
