1
This step requires 2 people.
Go to step 2 if your model number does not have a -4 designation.
Hardware Used: A (Base Plate), K (Caster Set), L (4 - Acorn Nuts), M (4 - Lock Washers)and N (8 - Washers).
Tools Required: 2 - 17mm wrenches.
Casters w/ Brake
to the front
Order of Hardware Assembly: Caster(K), M10 Washer(N), Base Plate(A), M10 Washer(N), M10 Lock Washer(M) and Acorn Nut(L).
With assistance, attach the casters to the base plate following the order of hardware assembly list above.
Using the 17mm wrenches, tighten the assembly until the lock washer compresses.
2
Hardware Used: B (2 - Chrome Tubes), E (4 - Set Screws) and I (4mm Allen Wrench).
Insert the chrome tubes (B) into the base plate (A).
Insert 4 - set screws (E) into the base place.
With the 4mm allen wrench (I),tighten the set screws until
the chrome tubes are secure.
