Instructions (cont.)
4. Take Modesty Panel (18" x16 1/2") and attach using (8) 3/4” screws (C).
(See Image #3)
. Attach to side of panels where the bottom shelf
extends further out.
5. Take the Door Panel (25"L x 13 1/4"W) and using (2) chipboard screws (J) mount the metal magnetic strip (I) to the door and screw into
the predrilled holes. Next take the door handle (M) and (2) 5/32" screws (L) and screw the handle to the door. Take the cam lock (K) and
insert it into the predrilled hole on the upper corner of the door. Using (2) chipboard screws (J) attach the cam lock into place.
(See Image
#4).
6. Take the door and insert two spindles (H), one on top of door and one on the bottom of door. Now take the left cabinet side panel and
the right cabinet side panel, line the wood dowels up with the holes in the shelves. Next take the door panel and line the bottom spindle up
with the hole in the bottom shelf. Take the cabinet top shelf and place on top of the two side panels and the door making sure to line up the
spindle on the door with the hole on the underside of the top shelf.
(See Image #5)
7. Once everything is lined up take the (4) 2" screws (E) and secure the top shelf through the holes in the metal side panels, two screws on
each side.
(See Image #6)
8. Take top shelf (18” x 16”) and attach the (4) small “L” shaped brackets (G) to the underside of the shelf.
(See Image #7)
The brackets
have two different style holes on them (perfectly round and oval). Attach the round side to the bottom of the shelf using (4) 3/4” screws, (C)
making sure that the other side of the bracket is facing towards the outside of the shelf. When attaching shelf to top of side panels make
sure the “L” brackets line up with the pre-drilled holes on the side panels. Attach using (4) 3/4” screws (C).
9. Take adjustable shelf (18” x 18”) and attach the (2) large “L” support brackets using (4) 3/4” (C) screws making sure that the smooth side
of the bracket is facing the outside of the shelf. Then take adjustable shelf and attach to the panels at the desired height using (4) 3/4" (C)
screws. (
See Image #8)
Electrical Option:
If you received the unit with an electrical assembly you may attach the electrical assembly vertically on the outside or
inside of the side panels. Attaching with the screws and wing nuts provided with the electrical packet.
5
6
7
8
4
Page 3 of 3
3
J
K
L
M
H
Revised 12/09
1
