background image

OTHER REPAIRS

For repairs or service beyond those described above, please contact your servicing distributor or dealer.

LIMITED WARRANTY

H-P PRODUCTS, INC. warrants that the turbine powerhead and the hand held turbine powerhead, when used
for household purposes, pursuant to Seller’s instructions, will be free from defects in materials and workman-
ship for a period of one year from the date of the initial consumer purchase. H-P PRODUCTS, INC. warrants
that the turbine powerhead or the hand held turbine powerhead, when used in a commercial application pur-
suant to Seller’s instructions, will be free from defects in materials and workmanship for a period of ninety (90)
days from the date of the initial consumer purchase. This warranty is limited to the replacement of defective parts
and any costs of shipping shall be incurred by the purchaser. THIS WARRANTY IS EXCLUSIVE AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY, AND H-P PRODUCTS, INC.
SPECIFICALLY DISCLAIMS RESPONSIBILITY FOR CONSEQUENTIAL AND INCIDENTAL DAMAGES, AND
LIMITS THE IMPLIED WARRANTY OF MERCHANTABILITY TO THE PERIOD OF EFFECTIVENESS OF THIS
EXPRESS WARRANTY.

H-P PRODUCTS, INC.,
Louisville, Ohio
44641 U.S.A.
(216) 875-5556

TROUBLE SHOOTING TURBINE

POWERHEADS

CAUTION

Moving parts – disconnect from vacuum system before servicing unit

PROBLEMS

1. TURBINE RUNS SLOW

3. BRUSH BOUNCES IN USE

2. BRUSH MAKES KNOCKING NOISE

4. BRUSH HARD TO PUSH

POWERHEAD INSTRUCTION MANUAL

FLOOR

HAND

BRUSH

BRUSH

1. CHECK BOTTOM PLATE

PAGE/PAR.

3/(E)

3/(C)(D)

2. CHECK BELT AND TENSION

PAGE/PAR.

3/(E)

3/(E)

3. CHECK BEATER BRUSH

PAGE/PAR.

3/(E)

4/(F)

4. CHECK ALL INTAKE AREAS

PAGE/PAR.

2/(C)

3/(D)

FOR OBSTRUCTIONS AND BRUSH
ROTATION DIRECTION

CENTRAL VACUUM CLEANER SYSTEMS

NON-BAG MODEL

BAG MODEL

1. CHECK DIRT RECEPTACLE

1. CHECK PAPER BAG

2. CHECK GUARD SCREEN

2. CHECK CLOTH BAG

3. CHECK ALL FILTER SCREENS

3. CHECK AIR FILTERS

4. CHECK HOSES FOR AIR LEAKS

4. CHECK HOSES FOR AIR

OR OBSTRUCTIONS

LEAKS OR OBSTRUCTIONS

READ OPERATION MANUAL PROCEDURES

Page 7

Содержание TURBINE POWERHEAD and HAND HELD TURBINE...











Отзывы: