H.Koenig UP370, Инструкция по эксплуатации

Страница: 7 / 79

2. HANDHELD VACUUM CLEANER, HANDLE, MAIN BODY AND MOTORIZED BRUSH
ASSEMBLY AND DISASSEMBLY
As showing in figure 4, put the handle assembly into the main body assembly, then fix the
handle and main body by the screw, then put the motorized brush into the main body. Pay
attention that the electric conduction needle should aim at the groove and hole, after
assembly, the brush release button will slip into the groove of the motorized brush, make
sure the brush will not fall off during the operation; After finishing the above assembly, please
use the hand hold the handle of the handheld vacuum cleaner and let the inlet insert the
fixed hole of the main body assembly, then press the handle into main body until hear the
block sound, that means it assemble well; When disassemble the handheld vacuum cleaner,
please press the handheld release button by hand, which means we can take down the
handheld vacuum cleaner. When disassemble the motorized brush, only press the brush
release button and pull out the floor brush.