background image

The H-King F6F Hellcat "Little Nugget" is the second in the "Reno Aces" mini-series from H-King, they are 

WW2 fighters dressed to impress at the air races. The F6F Hellcat "Little Nugget" with the included stock 

3108-1070KV brushless motor offers a really hot-rod performance straight out of the box, speeds approaching 

100mph are possible when using the recommended 2200mAh 4S LiPo. However, if you are an experienced 

hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless 

motor. This will give your great-looking Reno Ace a really ballistic performance on the same prop, ESC, and 

4S battery. This is only for those that can handle the extra speed and the extra rotational torque on hand-

launching.

INTRODUCTION:

FEATURES:

SPECIFICATION:

- Up to 100mph on 'Stock' motor. 100+ mph speeds with

optional 'Pro' motor.

- Reinforced EPO foam construction, lightweight, strong

and stiff.

- Plastic skid plates to streamline and protect the

airframe.

- Easy and quick assembly in just a few minutes.

- Easy to hand launch, super easy to belly land.

- Super stable at high and low speeds.

- Optional clear or golden canopy included.

1

- Wingspan: 990mm (39 inches)
- Length: 800mm (31.5 inches)
- Weight (RTF): 960g (33 oz)
- Motor (Stock): 3108-1070KV
- Motor (Pro): 3108-1160KV

 (optional)

- ESC: 40A Brushless w/BEC

l

-

Servos: 4 x 9g Digital

- Prop: 8x6

Recommended Battery: 2200mAh 4S 30~60C LiPo

Содержание Hellcat Little Nugget



















Отзывы: