H-KING DH82A TIGER MOTH, Инструкция по сборке

Страница: 15 / 32

13
G. Upper Wing Assembly.
1. Indentify all the parts required to assemble the upper wings and construct both panels over the plan on a flat surface as shown. Pin the
components down to ensure the panels stay flat as the glue sets. Note that the ribs have tabs so that they sit on the building board at the
correct angle.
2. Bend the 4mm stainless steel tube to the shape shown on the plan to form the 2 wing tips. Secure the stainless steel tube to the spars and
ribs using epoxy glue, for added strength add a piece of fiber cloth soaked in epoxy glue as shown in the picture. Once the basic panels are
finished remove from the plan and remove the small tabs on the wing ribs using a razor saw.