GYS GYSFLASH 101.12 CNT Скачать руководство пользователя страница 23

Страница: 23 / 88

GYSFLASH 101.12 CNT / 121.12 CNT FV /

123.12 CNT FV / 103.24 CNT FV

Confirm the recording of the charging data.

Continue?

Yes

The charger will then copy the charging data to the USB stick as files, « .CSV »

Custom configuration

List of modes and profiles available for customization:

CHARGE MODE

Charge

type:

Charge

profiles

Charging voltage

Pb-CHARGE

normal

2.40 V/cell

Charging profile for lead batteries of the types Gel, MF, EFB, SLA...

AGM

2.45 V/cell

Charging profile for most AGM lead-acid batteries including START and STOP.

However, some AGM batteries require a lower voltage charge (Normal profile). Check the

battery manual if in doubt.

water

2.45 V/cell

Charging profile for open liquid-type lead-acid batteries with plug.

Easy

2.40 V/cell

Charging profile dedicated to lead batteries that automatically adapts the charging current

according to the size of the battery.

However, for maximum charge optimization, it is recommended, when possible, to use

normal, AGM or liquid charge curves.

boost

2.42 V/cell

Maximum current charge for lead-acid battery. This type of charge is ultra-fast.

Warning : this type of charge must remain occasional in order to preserve bat-

tery life.

2.40 - 2.50 V/cell

Charging profile for the recovery of severely damaged lead batteries. It is essential to

recover the battery outside the vehicle to avoid damaging the vehicle electronics and in a

well ventilated area.

Caution: Recovery voltage up to 4.0 V/cell.

Li-CHARGE

LFP/LiFePO4

3.60 V/cell

Charging profile for Lithium batteries type LFP (Lithium Ferro Phosphate)

Li-ion std

4.20 V/cell

Charging profile for standard lithium-ion batteries based on Manganese or Cobalt (NMC,

LCO, LMO, MCO...)

LFP cell+

3.60 V/cell

Charging profile dedicated to LFP (Lithium Ferro Phosphate) type lithium-ion cells with

selection of the number of cells in series to be charged.

Li-ion cell+

4.20 V/cell

Charging profile dedicated to standard lithium-ion cells based on Manganese or Cobalt

(NMC, LCO, LMO, MCO...) with selection of the number of cells in series to be charged.

TRACTION

water

2.42 V/cell

Charging profile dedicated to open lead traction batteries for forklift trucks.

gel

2.35 V/cell

Charging profile dedicated to gel-type traction batteries for forklift trucks.

POWER MODES

Showroom

Maintains the battery's state of charge and supplies power when using the electrical consumers of a demonstra-

tion vehicle.

DIAG+

Supplies energy requirements during the vehicle diagnostic work.

CHANGE BAT.

Allows to keep the vehicle power supply during battery replacement, in order to preserve the memory of the

vehicle's ECUs.

Caution: Reverse polarity during use can be harmful to the charger and vehicle electronics.

POWER SUPPLY

Allows the charger to be used as an adjustable stabilized power supply with high power. The voltage to be regula

ted and the current limitation are fully adjustable.

Caution: Reverse polarity during use can be harmful to the charger and vehicle electronics.

Li-SUPPLY/LFP

Mode intended to supply lithium-ion cells of the LFP type (Lithium Ferro Phosphate) with selection of the number

of cells in series, adjustment of the voltage and current to be applied.

Li-SUPPLY/Li-ion

Mode intended to supply standard lithium-ion batteries based on Manganese or Cobalt (NMC, LCO, LMO, MCO...)

with selection of the number of cells in series, adjustment of the voltage and current to be applied.

MISCELLANEOUS

TESTER MODE

Allows to check the state of the battery, to evaluate the starting of the vehicle as well as the operation of the

alternator

Содержание GYSFLASH 101.12 CNT

























































































Результаты поиска

Содержание GYSFLASH 101.12 CNT

Отзывы:

GYS GYSFLASH 101.12 CNT, Руководство пользователя, Страница: 23 / 88

Результаты поиска

Содержание GYSFLASH 101.12 CNT

Отзывы: