GYS FLEX 250 A CEL, Руководство пользователя

Страница: 12 / 50

12
MMA
U1 = 110V U1 = 230V U1 = 400V
1~ 3~ 1~ 3~ 1~ 3~
30% 60% 100% 35% 60% 100% 41% 60% 100% 53% 60% 100% 40% 60% 100% 32% 60% 100%
140A 115A 90A 140A 125A 100A 200A 180A 150A 200A 190A 170A 250A 220A 190A 250A 200A 170A
25,6V 24,5V 23,6V 25,6V 25V 24V 28V 27,2V 26V 28V 27,6V 6,8V 30V 28,8V 27,6V 30V 28V 26,8V
TI
G
U1 = 110V U1 = 230V U1 = 400V
1~ 3~ 1~ 3~ 1~ 3~
60% 60% 100% 100% 60% 100% 80% 60% 100% 100% 60% 100% 65% 60% 100% 43% 60% 100%
140A 140A 110A 140A 140A 140A 200A 200A 180A 200A 200A 200A 250A 250A 220A 250A 225A 180A
15,6V 15,6V 14,4V 15,6V 15,6V 15,6V 18V 18V 17,2V 18V 18V 18V 20V 20V 18,8V 20V 19V 17,2V
MAINTENANCE
• Maintenance should only be carried out by a qualified person.
• Ensure the machine is unplugged, and that the ventilator inside has stopped before carrying out
maintenance work. (DANGER High Voltage and Currents).
• JBDC recommends removing the steel cover 2 or 3 times a year to remove any excess dust. Take this
opportunity to have the electrical connections checked by a qualified person with an insulated tool.
• Regularly check the condition of the power supply cord. If damaged, it will need to be replaced by the
manufacturer, its after sales service or a qualified person.
•
Ensure the ventilation holes of the device are not blocked to allow adequate air circulation.
ADVICE
•
Follow welding polarities and currents indicated on the electrode packaging
•
Remove the electrode from the electrode holder when not in use.
•
Ensure the ventilation holes of the device are not blocked to allow adequate air circulation.
SAFETY
Arc w elding can be dangerous and can cause serious and even fatal injuries.
Protect yourself and others.
Ensure the follow ing safety precautions are taken:
Arc radiation
Protect yourself with a helmet fitted with filters in compliance with EN169 or EN
379
Rain, steam,
humidity
Use your welding unit in a clean/dry environment (pollution factor ≤ 3), on a flat
surface, and more than one meter from the welding work-piece. Do not use in rain
or snow.
Electric shock
This device must only be used with an earthed power supply. Do not touch the
parts under high voltage. Check that the power supply is suitable for this unit.
Falls
Do not underestimate the weight of the apparatus. Do not move the unit over people or
objects . Do not drop it. Do not set it down heavily.
Burns
Wear protective or fire-proof clothing (overalls, jeans).
Use welder gloves and a fire-proof apron.
Protect the others by installing non flammable protection wall, or prevent the others
from looking at the arc and have them keep a sufficient distance
Fire risks
Avoid all flammable products in the working area. Do not work near flammable gas.
Fumes
Do not inhale welding gases and fumes. Use the device in a well ventilated
environment, with artificial extraction if welding indoors