GYS 026384, Перевод оригинальной инструкции

Страница: 10 / 40

10
NOMAD POWER 10
EN
Translation of the original instructions
OPERATION
Indicators
Press the ON/OFF button to check internal battery level of the NOMAD POWER.
Lights 1 flashing 1 steady 2 steady 3 steady 4 steady
Internal battery
capacity for the
device
0% 25% 50% 75% 100%
Indicators flash in turn, whilst charging the device. The number of indicators ON indicates the capacity of the NOMAD
POWER internal battery. All lights are steady if the battery is on hold or the charge is complete.
!
RECHARGE THE NOMAD POWER before first use and after each use.
INTERNAL BATTERY CHARGING
1 - Connect mains adaptor to domestic mains.
2 - Connect the other end to the NOMAD POWER to start the charge.
OR
1 - Connect car adaptor to the car cigarette lighter socket.
2 - Connect the other end to the NOMAD POWER to start the charge.
OR
not supplied
1 - Plug the USB cable to a charger with a USB output (not supplied)
2 - Plug the other end to the NOMAD POWER to start the charge.
STARTING THE VEHICLE
Emergency start function for petrol or diesel vehicles with a 12V battery.
To start a vehicle, please process as follows:
!
If the NOMAD POWER voltage is inferior to the vehicle voltage, the NOMAD POWER will not operate.
1
Connect the jumper cable to the NOMAD POWER connector.
2
SMART
BOOSTER CABLE
Error
Start
If the lights «Start» and «Error» flash alternately in green and red, the product is ready.
If the red light only is ON, the internal battery voltage of the NOMAD POWER is too low.
In this event, charge your device.