Gyros S 033G, Инструкция по использованию

Страница: 5 / 8

S033G-01A S033G-01B S033G-02A S033G-02B S033G-03A
S033G-03B S033G-04 S033G-05A S033G-05B S033G-06
S033G-07 S033G-08A S033G-08B S033G-10A S033G-10B
S033G-11 S033G-12B S033G-12C S033G-12D S033G-12E
S033G-13A S033G-13B
S033G-17
S033G-14 S033G-15 S033G-16
Head cover A Head cover B Tail decoration A Tail decoration B Main blades
Tail blade Main frame Balance bar Connect buckle Ascend and descend
Gear Top blades grip set Under blades grip set Battery case Lights decoration
Tail assembly Tail competent Metal frame Motor heat sink Main shaft
Motor A Motor B
Transmitter
Li-Poly Circuit board Charging
Troubleshooting
Spare parts
All the spare parts below can be bought from local distributor.
No reaction from
the helicopter
No reaction from
the helicopter
when in flight
1. Not enough power for the helicopter.
2. Not enough power for the controller.
3. The channel is different from helicopter and the
controller.
4. The gyro of the helicopter can’t find out the right
point.
1. Charge the helicopter battery
2. Install new batteries in controller
3. Make sure the same channel is used for the
helicopter and the controller.
4. Move the helicopter onto a flat surface, and then
turn it on. Then turn on the controller
Change frequency or use the helicopter out of the
range of other RC helicopters.
Have the same frequency remote control
transmitter.