Gyros S 033G, Инструкция по использованию

Страница: 3 / 8

Antenna, Battery & Charging
Charge time: about 240-250 minutes—Fly time 7-8 minutes!
Different types of batteries or new and used batteries are not to be mixed;
Batteries are to be inserted with correct polarity;
Exhausted batteries are to be removed from the product;
The supply terminals are not to be short circuited.
Install the antenna in the transmitter by turning clockwise until tight and secured.
Battery Installation in the remote controller
1. Use a crosshead screw driver to remove the controller battery cover. Insert 4 batteries
(size AA, 1.5V) observing the correct polarity indicated in the compartment. Replace the
battery cover and secure the screw.
Charging the helicopter battery
Be sure to switch off the helicopter power.
a. Plug the transformer into the mains. Plug the DC10V transformer to the mains transformer.
The red light will switch on.
b. On the helicopter, the cable with a white plug needs to be plug into the DC10V transformer.
The green light will switch on when the battery is charging. It will switch of when the
battery is fully charged
The helicopter contains a built-in Li-Po battery, please pay attention to the following matters:
- Keep the battery away from fire and heating sources. It could damage the battery or cause it
to explode.
- Keep the helicopter and the battery away from water.
- Only charge the helicopter with the provided adapter.
- Do not remove or dismantle the built-in battery.
- Do not leave unattended when charging.