A
A
The .RCU .Mode .Selection .buttons .(
TV, PC, CAB/SAT, and AUX
) .are .lit .when .pressed; .
these .buttons .light .up .(for .2-3 .seconds) .whenever .they .are .pressed .to .indicate .which .Control .
Mode .the .remote .is .in . . . . .
There .is .no .automatic .backlighting .on .any .of .the .RCU .buttons . . .The .“Backlight” .button .
controls .the .backlight .of .the .RCU .buttons .and .the .Display . .Upon .pressing .the .“Backlight” .
button, .the .main .RCU .keys .will .be .backlit . .If .the .Display .is .active .(by .pressing .the .Display .
button), .the .Display .will .also .become .backlit . .
The .backlight .acts .as .a .toggle .and .can .also .be .used .to .turn .off .all .backlighting . .Additionally, .
the .backlighting .will .timeout .after .a .short .amount .of .time .(timeout .occurs .after .last .button .
pressed .and .the .backlight .turns .off .if .no .other .button .is .pressed .within .10 .seconds) .
If .the .backlighting .seems .dim, .the .batteries .may .need .to .be .replaced .
Power / Standby Toggle Button
This .button .turns .the .selected .device .on .or .off .or .toggles .its .power .state .from .standby .to .
active . . .The .device .is .selected .with .the .RCU .Mode .Switches; .
PC, TV, CAB/SAT, and AUX
.
In .
PC
.mode, .this .button .issues .a .standard .Windows® .
STANDBY
.command . . .Various .options .
for .this .command .can .be .set .up .in .Windows . .Go .to .Start/Control .Panel/Power .Options/
Advanced .and .then .set .a .function .for .the .
STANDBY
.command . .In .the .default .configuration, .
if .the .PC .is .already .on, .press .this .button .to .put .the .PC .into .standby .mode . .If .the .PC .is .in .
standby .mode, .press .and .hold .this .button .for .2 .- .3 .seconds .to .wake .up .the .PC .
Backlighting
RF Receiver & Synchronization
Communication .between .the .RCU .and .the .PC .is .done .via .an .RF .transceiver .which .is .plugged .
into .a .standard .USB .port .in .the .PC . .In .order .for .this .to .work, .you .need .to .synchronize, .or .
“bind” .your .remote .and .PC . .See .below .for .the .binding .procedure .
.
Receiver Installation
The .RCU .requires .a .USB .RF .transceiver .be .plugged .into .a .USB .port .in .the .PC .in .order .to .
access .RF .and .gyro .functions . .The .USB .extension .cable .can .be .used .to .maximize .the .range .
of .the .RCU .by .placing .the .USB .RF .transceiver .away .from .other .electrical .components . .A .
USB .RF .transceiver .does .not .need .to .be .plugged .in .to .use .the .IR .remote .functions . .See .the .
diagram .below .
. . . .
Setting Up & Synchronizing The
Remote & The PC
After .inserting .the .batteries .in .the .remote .control .unit,
1 . .Hold .the .remote .in .close .proximity .to .the .PC . . .
2 . .Press .the .
CONNECT
.button .on .the .RF .Dongle .transceiver .which .is .plugged .into .
. . . .the .PC .USB .port . . .
3 . .Press .the .
CONNECT
.button .on .the .underside .of .the .RCU . . .
4 . .The .Display .screen .on .the .RCU .will .indicate .a .successful .connection .
5 . .If .a .successful .connection .is .not .made, .repeat .steps .1 .- .3
17
18
All manuals and user guides at all-guides.com