6
While holding the ACTIVATION TRIGGER, flex your wrist up, down,
sideways, in a manner similar to using a flashlight. The mouse cur-
sor tracks the motions of your hand.
4.
Use your thumb to press the left/right mouse buttons or to operate
the scroll wheel.
5.
Double-click the ACTIVATION TRIGGER to keep the cursor continu-
ously active. To stop the cursor, click the ACTIVATION TRIGGER
once.
Powering Off Ultra Mouse
To power off the Ultra mouse:
1.
Simultaneously press and release the CHANNEL button and TEACH
button on the bottom of the unit. The mouse will immediately enter
deep sleep mode and will be unresponsive to button clicks. The unit
will confirm it is powering off by flashing its LED three times.
2.
Repeat this sequence to power the unit back on. The unit will
confirm it is powering on by flashing its LED for 1 second.
Note:
It may be necessary to power off the unit when traveling on commercial airlines
due to FCC regulations regarding radio-emitting devices.
Fine-tuning Cursor Control
The Ultra mouse uses your standard Windows mouse driver. Any settings
that are available to a standard desktop mouse are also available to Ultra
mouse. Multiple factors will determine how you adjust your mouse to suit
your preference including screen resolution, mouse driver version and
overall personal preference. While becoming familiar with your mouse and
getting a feel for the GyroPoint method of cursor control, Gyration
recommends adjusting your mouse driver to the following settings:
T
Pointer Speed – Average. Some new users prefer this setting to be
slightly slower than average. Advanced users will increase the
speed so that less wrist movement gives them more screen
