Gymstick GT1.0, Руководство пользователя

Страница: 19 / 24

19 GT1.0 TREADMILL
TROUBLESHOOTING
E05: Current overload
protection (Self Protecting
System)
The incoming voltage is
too low or too high. The
control board is damaged.
Restart the treadmill.
Check the incoming voltage to
ensure it’s correct.
A moving part of the
treadmill is stuck and
therefore the motor is
unable to rotate properly.
Inspect moving parts of the
treadmill to ensure that they
are operating correctly.
Check the motor, listen for
strange noise and check for a
burning smell. Replace the
motor if necessary.
Check the control board,
replace if damaged.
Lubricate the treadmill.
E06: Motor Abnormality
The motor wire is not
connected or the motor is
damaged.
Check motor wires to see if
the motor is connected. If
the wire has been punctured
or damaged, you will need to
replace it. If the problem is
not rectified, you may need to
replace the motor
E08: Control Board
Abnormality
The control board is not
connected.
Check the upper and middle
wires to see if the control
board is connected. If the
wire has been punctured or
damaged, you will need to
replace it. If the problem is
not rectified, you may need to
replace the control board.
E10:Motor Abnormality
The motor is damaged or a
moving part of the treadmill
is stuck and therefore the
motor is unable to rotate
properly.
The torque is too big, please
adjust the torque to be
smaller.
Inspect moving parts of the
treadmill to ensure that they
are operating correctly.
Replace the motor if
necessary.
Lubricate the treadmill.