
25
English
Caution
.
●
When generating sterilizing water (hypochlorous acid water), strong alkaline water comes out from the bottom of the base part.
Please be sure to put it on the coaster attached. If it adheres, it may cause discoloration. After generationg sterilizing water,
generate hydrogen water (3 minutes) with tap water and discard. Normal hydrogen water generation will be impossible without
that operation. Please note that after sterilizing water generation, the strong alkaline water that remains in the base generator may
come out due to vibration.
Notice
.
●
Stir the sterilizing water (hypochlorous acid water) in the bottle and then
dilute it 10 times
before use.
When using it for new coronavirus,
dilute it 2-3 times
. It is also possible to use it without dilution.
After generation, chlorine odor will remain in the bottle.Thoroughly clean after use.
.
●
If the LED turns off during generation (before the specified time), the remaining battery capacity is low.
Try to generate the water again after charging for more than 15 minutes.
.
●
Bacteria tend to increase faster in hydrogen water than in tap water.
Do not drink the generated hydrogen water that has been left for a long time.
.
●
Hydrogen is easier to escape as the water temperature, air temperature or room temperature increases.
It is recommended to generate the hydrogen water left in the product again after time passed for a while to increase the hydrogen
concentration.
.
●
Hydrogen concentration of generated hydrogen water varies depending on the water quality.
.
●
Remove the ceramic particle cartridge from the cap and dry it after use. Humidity of the ceramic particle cartridge may promote the
growth of mold and the function of the ceramic particle deteriorates quickly.
.
●
When generating sterilizing water or after that generating hydrogen water, strong alkaline water will come out from the bottom of
the base generation. So be sure to use a coaster and wipe the bottom well with a cloth. Please note that after sterilizing water
generation, the strong alkaline water that remains in the base generator may come out due to vibration.
.
●
Sterilizing water is not drinkable.
.
●
Please use sterilizing water for sterilization and deodorization.
.
●
Do not generate sterilizing water repeatedly with the same water.
Do not generate sterilizing water with more than the specified amount of purified salt. Otherwise, it may cause the product to fail.
.
●
When cleaning the coaster and the bottom of the base,
use rubber gloves
to prevent the strong alkaline water from touching your
skin.
.
●
After using the coaster, wash with running water and dry it well. Otherwise, it will be easy for mold to grow on the coaster.
■
When using hot water
Be sure to keep the water level below the bottle screw. (right illustration: below the red line)
.
●
Since the temperature of the bottle gets high, wear gloves or use a dry cloth to prevent scald.
.
●
It may cause scald if you drink directly. Try to drink hot water after pouring into another vessel and
check the temperature of water.
.
●
Remove the ceramic particle cartridge before use.
■
When storing Silky Pure
Pour 100 cc of water into the bottle and press the generation button for 3 seconds or more to generate ozone water. After generation,
shake the bottle once or twice to disinfect the bottle. To prevent the membrane from drying, keep it with ozone water in it.
Even if you do not use it, wash it every 3 days and replace it with water to generate ozone water.
■
When keeping sterilizing water
Please keep it in a cool and dark place. Please use it within one week. When diluted, please use it as soon as possible.
Depending on the container and storage method, the concentration of hypochlorous acid will be low and the effect will reduce.
3
After the LED flickers, it will light up and make a sound, and generation will
start after about 2 seconds.
Hydrogen water (1 minute mode)
: Beep
・
Blue light flash up once
⇒
Blue lights up
Hydrogen water (3 minutes mode)
: Beep
・
Blue light flash up 2 times
⇒
Blue lights up
Sterilizing water
・
ozone water (5 minutes) : Long beep
・
Green light flash up 2 times
⇒
Green lights up
.
●
When you press the generation button 5 times continuously, the sound can be switched on and off.
On: Beep (Once)
Off: Beep-beep (Twice)
.
●
When you want to stop generation, press the generation button once.
4
When generation is completed, beep-beep sounds and the LED turns off.
.
●
When the remaining battery capacity is low, the LED flashes up in red five times after generation
completed.
Содержание SilkyPure HWP-3690H
Страница 1: ......