Gymrex GR-MG 64, Руководство пользователя

Страница: 23 / 109

and M12 locknuts. Guide the screw from the supporting frame side. Fasten
using the procedure described in item a) (see the drawing).
g) Fix the training arm (8) to the training arm frame (7). Fix on both sides with
sliding washers and M8x20 screws.
h) Install the protective roller (9) on the lifting arm rod.
For this purpose, use two safety caps and the roller. First slide the cap onto the
rod, the repeat with the roller. Finally, secure with the second cap. Attach with
an M10 washer and M8x25 screw.
STEP II