background image

NM244

08/09/08

3601

45 RUE G. DE FLOTTE

13012  MARSEILLE (FRANCE)

TEL : 33.(0).4.91.87.51.20

FAX : 33.(0).4.91.93.86.89

www.gymnova.com

[email protected]

Constantly aiming to improve our products, we reserve the right to make changes to the equipment and dimensions without further discussion.

Warning:

This equipment should be installed by a qualified individual.
The apparatus should be used by only one person at a time, supervised by a qualified individual and with appropriate landing
mats (and/or a landing pit).
Using this equipment for purposes other than those originally intended is not allowed.

Recommendations:

As shown in French Standard NF S52-400 the following is recommended:
- keep these instructions for subsequent reference (inspection, maintenance, etc.).
- periodically carry out predictive maintenance.
- depending on how much it is used have the equipment serviced yearly or every few years.

Weight of the apparatus: 100 Kg (220.46 lb)

Overall size:

- Overall length: 5 m (Body length) (16.4 ft)
- Overall width: 1 m (Leg base length) (3.28 ft)
- Inside distance between leg bases: 4.30 m (14.1 ft) - outside: 4.40 m (14.43 ft)

Packaging:

A

SSEMBLY

 I

NSTRUCTIONS

B

ALANCE

 B

EAM

L

EGS

 C

ONTINUOUSLY

 A

DJUSTABLE

 

TO

 

THE

 

FLOOR

KEEP THIS

DOCUMENT

No. of

Packages

      Package

         Ref.

3601

Balance beam Continuously

Adjustable to the floor

Volume (ft

3

)

Weight (lb)

Dimensions (ft)

3601/20

Upright for

continuously

Adjustable Feet

3601/10

Beam Body,

continuously

Adjustable Feet

3601/50

Pair of leg bases for

continuously

Adjustable Feet

2

3.673

55.12

5.413 x 0.984 x 0.689

1

6.109

90.39

16.732x0.722x0.558

1

2.62

22.05

3.379 x 0.59 x 1.312

4

Содержание 3601/10










Отзывы: