GYBE Humanity, Руководство по сборке

Страница: 6 / 14

6
4
1 2
3
Spread out the side panel parallel to the tent.
The starting point of the zipper is always
located on the left edge of a side panel.
The starting point of the tent-side zipper is just
under the roof panel, and has to be pulled up a
bit with the left hand (1a).
The beltstraps on the lower part of the panel
are intended to prevent the zipper from being
forced open by strong winds.
Pull the beltstrap through the square-shaped metal
ring on the tent foot, and fasten it to the side panel (3a).
The beltstraps should be pulled to the point of
a light tension.
While pulling the zipper up, please be sure
that the leading edge of the side panel is
guided by hand (2a), in order to ensure a
problem-free zip-up.
For strong winds, the side panels need to be
fixed to the ground. Use tent pegs, placing them
through the loops (4a) found on the bottom edge
of the side panel.
(Tent pegs are not included)
Please be sure that the pegs are placed deeply
and angled, so that they can withstand a greater
load.
A
A
A
A
ATTACHING
SIDE PANELS EN