GXi Outdoor Power 30SB, Руководство пользователя

Страница: 5 / 40

1
30SB, 36SB, 45SB
Rev Nov2014
Snow BEAST
Safety Informa on
Emission Control System Informa on
The U.S. and California Clean Air Acts
EPA and California regula ons require all
manufacturers to furnish wri en instruc ons
describing the opera on and maintenance of
emission control systems. The following
instruc ons and procedures must be followed in
order to keep the emissions from your engine
within the emission standards. Maintenance,
replacement, or repair of the emission control
devices and systems may be performed by any
engine repair establishment or individual, using
parts that are ‘‘cer fi ed’’ to EPA standards.
Safety Label Loca ons
Safety labels are located on your snow blower to
warn you of poten al hazards. Read them carefully.
If a label comes o ff or becomes hard to read,
contact GXi Parts and Service, LLC for a
replacement.
Operator Responsibility
It is the owner’s responsibility that all operators
and mechanics must be trained and read this
manual before opera ng the snow blower as well
as being physically able individuals. They should be
instructed about safe opera ng and mechanical
procedures. If they can not read or understand
English, it is the owner’s responsibility to explain all
safety opera ng instruc ons. The owner or
operator is responsible for accidents or injuries
occurring to themselves, other people or property.
Poten al misfortunate incidents can be prevented
by the owner/user.
Safety Informa on and Warnings
Snow Blower Inspec on
For your safety, inspect the snow blower before each
use. Before you begin your inspec on, be sure the
following condi ons are met: the snow blower should
be on a level surface, with the igni on switch o ff , the
key removed, and the augers disengaged. Also,
disconnect the spark plug wires from the spark plugs
and ground them against the engine to prevent
inadvertent star ng.
WARNING
WARNING! Do not use your BEAST snow blower to carry
passengers. Keep bystanders, helpers, pets and children
at a safe distance from the machine while it is in
opera on. Inspect the area where the equipment is to be
used and remove all objects such as rocks, toys, and wires
which can be thrown by the machine causing serious
injury or death.
Wear appropriate clothing including hard hat, safety
glasses and hearing protec on. Long hair, loose clothing
or jewelry may get tangled in moving parts.
WARNING
Training
1. Read, understand, and follow all instruc ons on
the machine and manual(s) before a emp ng to
assemble and operate.
2. Operator must be familiar with all controls, their
opera ons, and how to stop the engine and
disengage the controls quickly.
3. Never allow children to operate this machine.
4. Never allow adults to operate this machine
without proper instruc on.
5. Exercise cau on to avoid slipping or falling,
especially when opera ng the machine in reverse.
6. Keep area of opera on clear at all mes.