manualshive.com logo in svg

GWS MIG 160, Инструкция по эксплуатации, Страница: 10 / 18

Поделиться
Скачать
GWS MIG 160 Скачать руководство пользователя страница 10

9

4.2 Control Panel

VOLT

DOWNSLOPE

ARC FORCE

In different welding modes, this knob has different 
functions:

MMA

  Adjusts the arc force, the range is 0~10

TIG

 

Adjusts the time of down slope

MIG

 

Adjusts the welding voltage, the range is 10~25V

4.3   Argon ARC Welding Operation
4.3.1  TIG Welding (4T Operation)

The start current and crater current can be pre-set. This function can compensate the possible crater that appears at the 
beginning and end of welding. Therefore, 4T is suitable for the welding of medium thickness plates.

Pulsed TIG long welding (4T):

Introduction:

• 0: Press and hold the gun switch, Electromagnetic gas valve is turned on. The shielding gas starts to flow
• 0~t1: Pre flow time, adjustment range of pre flow time: 0.1~1.0S
• t1: Striking success, adjustment range of start current 10~200A
• t2: Loosen the gun switch, the output current slopes up from start current. If the output pulse function is turned on, the
   output current is pulsed
• t2~t3 Output current slopes up to the setting current value; adjustment range of up slope time 0~10.0S

t( s)

0

I( A)

t1

switch

t5

Loosen the  

t7

Striking success

Stop arc

t3

t4

t2

t6

switch

Loosen the  

Welding current (peak 

current) setting value
Base current setting 

value 

Start 

current

Crater 

Repress down the 

switch

current 

Press and hold the 

welding gun switch

• t3~t4: Welding process. During this period, the gun switch is loosened
• t4: Repress down the gun switch, the output current slopes down to crater current
• t4~t5: Down slope time, adjustment range of down slope time: 0~10.0S
• t5~t6: Crater current holds time; adjustment range of crater current: 10~200A
• t6: Loosen the gun switch, stop arc, and keep on argon flowing
• t6~t7: Post flow time, adjustment range of post flow time: 1.0~10.0S
• t7: Electromagnetic valve is closed and argon flowing stopped. Welding is finished.

160

Содержание MIG 160



















Отзывы:

Нет отзывов