PRP Series Programming Manual
64
IEEE 488.2 Common Commands
*CLS .......................................................................................... 64
*ESE .......................................................................................... 64
*ESR .......................................................................................... 65
*IDN ......................................................................................... 65
*OPC ......................................................................................... 65
*RST .......................................................................................... 66
*SRE .......................................................................................... 66
*STB .......................................................................................... 66
*TRG ......................................................................................... 66
*TST .......................................................................................... 67
*WAI ......................................................................................... 67
*CLS
Set
Description
The *CLS command clears the Standard Event
Status, Operation Status and Questionable Status
registers. The corresponding Enable registers in
each of the above registers are not cleared.
If a <NL> newline code immediately precede a
*CLS command, the Error Que and the MAV bit in
the Status Byte Register is also cleared.
Syntax
*CLS
*ESE
Set
Query
Description
Sets or queries the Standard Event Status Enable
register.
Syntax
Query Syntax
*ESE <NR1>
*ESE?
Parameter
<NR1>
0~255
Return parameter <NR1>
Returns the bit sum of the Standard Event
Status Enable register.
