PRP Series Programming Manual
40
Output Commands
OUTPut:DELay:ON .............................................................. 40
OUTPut:DELay:OFF ............................................................ 40
OUTPut:MODE ..................................................................... 41
OUTPut[:STATe][:IMMediate] ............................................ 41
OUTPut[:STATe]:TRIGgered .............................................. 41
OUTPut:PROTection:CLEar ............................................... 42
OUTPut:PROTection:TRIPped........................................... 42
OUTPut:DELay:ON
Set
Query
Description
Sets the Delay Time in seconds for turning the
output on. The delay is set to 0.00 by default.
Syntax
Query Syntax
OUTPut:DELay:ON <NRf>
OUTPut:DELay:ON?
Parameter
<NRf>
0.00~99.99 seconds, where 0=no delay.
Return parameter <NRf>
Returns the delay on time in seconds until the
output is turned on.
OUTPut:DELay:OFF
Set
Query
Description
Sets the Delay Time in seconds for turning the
output off. The delay is set to 0.00 by default.
Syntax
Return Syntax
OUTPut:DELay:OFF <NRf>
OUTPut:DELay:OFF?
Parameter
<NRf>
0.00~99.99 seconds, where 0=no delay.
Return parameter <NRf>
Returns the delay off time in seconds until the
output is turned off.
