GSP-818 Quick Start Guide
14
tree in the
File
function
6. RF Input
connector
The RF input may be connected to a
device via a N type connector.
Note
When input attenuator is higher than 10 dB, the RF port
input signal must be less than +30 dBm.
Input voltage at RF input port must not be higher than
50 V DC to avoid damage to the attenuator and input
mixer tracking generator.
7. Unit keys
Unit keys include GHz/dBm/s,
MHz/dB/ms, kHz/dBmV/μs and
Hz/mV/ns. After entering the desired
numbers, choose an appropriate unit to
complete the input. The specific meaning of
unit is decided by the type of input parameter
(“frequency”, “amplitude” or “time”).
8. Numeric
keypad
See page 20 for details.
9. TG output
connector
The output of the tracking generator can
be connected to a receiver through an N
type male connector, users can purchase
this option if required.
10. TG output
On/Off
button
When the TG function is enabled, the
backlight of button turns on and turns off
when the function is disabled.
11. Earphone
interface
3.5mm stereo headphone jack (wired for
mono operation)
12. USB Host
port
The analyzer may serve as a "host" device
to connect to external USB devices. This
interface is available for USB storage
devices.
13. Power key
Push to turn on, long push to turn off
