K-BUS
®
KNX/EIB
Dimming Actuators
44
Note: if selected “transmit new brightness”, the object “Brightness status X” and object “Brightness
X” cannot be linked together by a same group address, or lead to the device internal loop-back, and enter
into endless loop, to make the bus system crash.
Parameter “Status report”
This function defines whether report the switch status to the BUS when the setup object “switch” is changed.
Send “1” to the BUS when the current brightness value is greater than 0; send “0” when the value is equal to
0.Options:
Nothing
It’s new status
It will not send any report of the current switch status with “Nothing”. And send a status changed report of
switch to the BUS with “It’s new status”.
Note: if selected “it’s new status”, the object “Switch status X” and object “Switch X” cannot be linked
together by a same group address, or lead to the device internal loop-back, and enter into endless loop, to
make the bus system crash.
5.4. Parameter window “Dimming general”
5.4.1 Parameter window “X: dimming general”
Fig. 5.4 Parameter window “CH X dimming general”
Parameter “Time duration of dimming time=entry*2”
It is used to set the dimming time duration. No matter it is brightness dimming or switch dimming, when
