WWW.GVISION-USA.COM
30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. [email protected]
8
Ensure the remote control is pointed toward the IR receiver on the display. No obstacles should
be placed between the remote control and the IR receiver. The effective receiving distance for
the controller is 3 meters.
Camera & DVR buttons of the remote controller is for backup use, not functional with this model.
1. To ensure a normal operation, the remote control should not be dropped
or damaged in any way. It should also be kept dry and away from all heat sources.
2. Battery replacement is necessary when the remote controller acts inconsistently or stops
operating the LCD display.
Choose the input source
If you hope to show the video from the external input source, Before chose the right source in
OSD, you need to connect the devices, otherwise, when you select the source ,the none or no
signal will appears on the screen, Press source button on the monitor or remote control, the
menu appears on the screen ,then press source to select the monitor item, and press“ +/- (>)”
to enter it.
HDMI :
the input source from HDMI device
VGA :
the input source from VGA
Camera :
the source from Built-in IP camera video
USB/SD
：
Monitor built-in multimedia to display advertisement Video or Photo
The PVM Can automatically switch between the Advertisement and Camera based on motion
detection pls refer to the setting of the PVM Image mode>Motion. The PVM can also auto switch
between different channel based on time, pls refer to the Image Mode setting>Switch
5
Input Source
