GVD M1184, Быстрый старт

Страница: 26 / 54

Mobile NVRs M1184 / M1284 Quick Start Guide 20
Install Internal SATA HDDs/SSDs
In order to preserve recording data, the mobile NVR supports four 2.5" SATA HDDs or SSDs, two internal
and the other two outside accessible. This section will guide you to install the internal SATA HDDs/SSDs.
For the installation of the outside accessible ones, see Install Outside-accessible SATA HDD/SSD on page
22 .
1. Place the mobile NVR on a flat and soft surface. Find the SATA storage tray knobs perching on one
side of the mobile NVR. First loosen the knobs and then slide out and fully remove the trays from the
mobile NVR.
2. Use a hex wrench to loosen and remove the screws as marked in the illustration below. Then
dismantle the front, rear and bottom panels from the mobile NVR.
M1184 M1284
The inside of the mobile NVR then comes to
view.