8
compliant system if it was purchased after June
1994 or if the BIOS is dated after June 1994.
Proceed to one of the following sections,
depending on your system's configuration:
•
Section 2.4.1 if you are running Windows
95 (with or without a Plug and Play PC)
•
Section 2.4.2 if you are running Windows
3.1x or DOS on a PnP-compliant PC.
•
Section 2.4.3 if you are running DOS or
Windows 3.1x on a non-PnP PC.
2.4.1
Configuring in Windows 95
The version of Windows 95 you have will
determine which set of dialog boxes is presented to
you when installing the modem in Windows 95.
Proceed to one of the following sections, depending
on your Windows 95's diaglog box:
•
Section 2.4.1.1 when Windows 95 starts for
the first time after card installation, it detects
the modem and it displays the New
Hardware Found dialog box
•
Section 2.4.1.2 when Windows 95 starts for
the first time after card installation, it detects
the modem and it displays the Update
Device Driver Wizard.
2.4.1.1
Windows 95 Release 4.00.950
When Windows 95 starts for the first time after
card installation, it detects the modem and displays
the New Hardware Found dialog box.
Under New Hardware Found, when asked to
"Select which driver you want to install for your new
hardware,"click on "Driver from disk provided by
hardware manufacturer. "Click OK."
The Install From Disk dialog box now instructs
you to "insert the manufacturer's installation disk
into the drive selected, and then click OK. "Insert
