12
Note: Any time the COM or IRQ setting for the
modem is changed, the settings in the software
must be changed to match.
2.5 Software Installation and Configuration
You are now ready to install and configure the
communication software. Refer to your software
manual for installation procedures.
We suggest the following communication
parameters when you first use your data
communication software. Consult the software
manual for information on using these and other
parameters/features.
115,200bps; 8 data bits; no parity; 1 stop bit;
RTS/CTS flow control set to "On;"
initialization string: AT&F
We suggest that a "Generic Class 1" modem
type should be selected in your fax software, and a
Generic Rockwell
selected in your Voice software.
Note that your software must be configured
to communicate with the modem on the
same COM port and IRQ line used by the
modem.
2.6 Using the Fax, Voice, and
