GVC KR632, Руководство пользователя, Страница: 46 / 56

46
This allows you to set your system’s power button to
two modes, either Suspend or On/Off. While set to
Suspend, when the power button is first pushed,
system will go into a suspend mode, pushed again it
goes into wake-up mode. Or, for On/Off, push once for
On and once for Off.
l
Power Management Setup > Restore on AC/Power Loss
It specifies how the computer responds following a
power failure.
Stay Off keeps power off until power
button pressed. Last State restores previous power
state before a power failure. Power On restores power
without restoring previous power state.
l
Power Management Setup > LAN Wake-On From Soft Off
This option specifies whether the computer responds to
an incoming call or not. Wake-On Lan requires a PCI
add-in network interface card with remote wakeup
capabilities.
l
Power Management Setup > RTC Alarm
Resume From Soft Off
This allows you to have an unattended or automatic power up of your system. You may
configure your system to power up at a certain time of the day by selecting
Everyday, or on the 1st through the 31st by selecting the RTC Alarm Date.
RTC Alarm Date / RTC Alarm Hour / RTC Alarm Minute /
RTC Alarm Second : To enter the second you want.
Note: The above two items (LAN Wake-On From Soft OFF & RTC Alarm
Resume From Soft Off) only work when Power On is selected in Restore on
AC/Power Loss item.
4. BIOS SETUP
Suspend
On/Off ( Default
)
Stay Off ( Default )
Power On
Last State
Disabled ( Default
)
Enabled