GVC KR632, Руководство пользователя, Страница: 4 / 56

4
EASY INSTALLATION
The following “Easy Installation” steps are for
users accustomed to the assembly of a
computer system. For those individuals
requiring more specific information please
refer to the more detailed descriptions located
within the latter chapters of this manual. Note:
You must keep your power cable unplugged
until the following installation steps are
completed.
Getting Start:
T
ouch a grounded metal surface to release static electricity
stored in your body before unpacking your motherboard. For
details please refer to
Precaution section in Chapter 3.
I nstall the CPU by correctly aligning the CPU with the Slot 1
as noted in the motherboard diagram. Once aligned, press
down on the CPU gently but firmly. Next, install either the
3.3 volt unbuffered EDO or SDRAM into the 168 pin
DIMMs. See
Sec. 3.2 & Sec. 3.3.
A
fter completing the above steps, install any expansion
cards into the appropriate PCI, ISA or AGP slots and screw
them tight to the chassis. See
Sec. 3.4.
P
lug in all cables included in the package except for the
power cord. Please see Sec. 3.5.
P lease rechecked all steps to ensure no mistakes
have been made and then plug in the power cord
and turn on the power to enter the BIOS setup,
Chapter 4.
EASY INSTALLATION
R e l e a s e
S t a t i c E l e c t r i c i t y
C o u p l e
C o n n e c t o r s O f
H D D , F D D …
I n s t a l l A l l
E x p a n s i o n S l o t s
I n s e r t C P U &
R A M