GVC IN5598, Руководство пользователя

Страница: 49 / 51

4. BIOS SETUP
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector
read/write. If your IDE hard drive supports block mode, (most new drives do), select
‘
Enabled ” for automatic detection of the optimal number of block read/writes per
sector the drive can support.
Onboard FDC Controller
Select “ Enabled” if your system has a Floppy Disk Controller, (FDC) installed on the
system board and you wish to use it. If you install an add-in FDC or the system has no
floppy drive, select “
Disabled” in this field.
Onboard Serial Port 1/2
Select an address and corresponding interrupt for the first and second serial ports.
Onboard Parallel Port
Select a logical LPT port name and matching address for the physical parallel (printer)
port.
Onboard Parallel Mode
Select an operating mode for the onboard parallel (printer) port. Select “ Normal”
unless your hardware and software require one of the other modes offered in this field.
SPP Standard parallel port mode (Default)
EPP Bi-directional mode
ECP Fast, buffered
ECP+EPP Bi-directional and buffered
ECP Mode Use DMA
Select a DMA channel for the port.
PS/2 Mouse Function
Select “ Enabled” if your system contains a PS/2 port and you have a PS/2 mouse in
use.
USB Controller
Allows you to enable USB Bus or not.
USB Keyboard Support
Select “ Enabled” if your system contains a Universal Serial Bus, (USB), controller and