manualshive.com logo in svg

GVC IN5598, Руководство пользователя

Поделиться
Скачать
GVC IN5598 Скачать руководство пользователя страница 3

COMPLIANCE & CERTIFICATE

ISO 9001 Certificate:

This device was produced in our plant with advanced quality
system certified by DNV QA Ltd. in according to ISO 9001.
This Certificate is valid for:
DESIGN & MANUFACTURE OF MOTHER BOARDS
AND PERSONAL COMPUTERS.

CE Declaration:

CE marking is a visible declaration by the manufacturer or
his authorized representatives that the electrical equipment
to which it relates satisfies all the provisions of the 1994
Regulations.

FCC Compliance:

FCC

 stands for 

F

ederal

 C

ommunications 

C

ommission.

This product complies with FCC Rules Part 15 and has
been tested, and complied with the EMI rules by a certified
body. In normal operation, there shall be no harmful
interference caused by this device nor shall this devise
accept any interference received, including interference that

may cause undesired operation of this product.

Microsoft Windows Compliance:

Microsoft, Windows NT, Windows, and the Windows Logo are

registered trademarks of Microsoft Corporation.

Содержание IN5598




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды