GVA GVAOR11FT, Инструкция по эксплуатации, Страница: 8 / 15

8
Operations
Using The Heater
NOTE: The heater is packaged with castor wheels unattached. You must attach them before
using the heater, see opposite for instructions.
1. Choosing a safe location
• Always place the heater on a flat and stable surface. Using it on an uneven or sloping
surface may cause damage to the heater.
• Make sure you have read all safety instructions on pages 3 to 4, which will help you
choose a safe location for your new heater.
2. Switching on
• Set the power setting switch to the OFF (0) position.
• Set the thermostat knob to LOW (the thin end of the circle).
• Then insert the plug into a well earthed wall socket.
3. Selecting a heat setting
• Rotate the thermostat knob clockwise to HIGH (the thick end of the circle).
• Switch the heater to desired heat setting:
Switch (I) for 800W, Switch (II) for 1200W, Switch (I) & (II) for 2000W
• The power light indicator will light up.
4. Setting the thermostat
When your room has reached the desired temperature:
•
Slowly rotate the thermostat knob counterclockwise until the pilot light goes out. The
thermostat can now be left at this setting.
• As soon as the room temperature drops below the set temperature, the unit will
switch itself on automatically until the set temperature has been reached again. This
way the room temperature remains consistent with the most economical use of
electricity.
5. Changing the temperature
If you want to change the room temperature setting:
•
Rotate the thermostat knob clockwise to raise the temperature or counterclockwise
to lower it.
6. Switching off
Once you have finished using your heater:
•
Turn the heat settings switch to the OFF (0) position.
• Turn the thermostat knob to LOW (the thin circle shape).
• Then unplug the heater from the mains supply outlet.