4. Time zone:
Press OK Key enter Time Zone Select Menu. And press
adjust Time Zone. The Time
Zone setting of the TV is initially set using data from local Digital TV stations. You can
manually adjust the time zone in the TV if required (eg. for locations where DTV signals are
not available).
5.Option menu
To enter the Option menu, press MENU button and then press or buttons to select the Option
Menu. Once in Option Menu, press or buttons to select the settings you wish to adjust. Press
MENU button to return to the Main Menu.
< >
OSD Language English
OPTION
Audio Languages
Subtitle Languages
Hearing Impaired
PVR File System
Restore Factory Default
HDMI CEC
HDMI CEC
Device list
HDMI CEC Off
HDMI ARC Off
Auto Standby Off
MENU
19
Advanced Features
4.Time menu
The fourth item of the menu is the time menu. You can adjust the clock, power on/off time, sleep
timer etc.Press to move, press OK to adjust.
Off Time
On Time
Sleep Timer
Time Zone
Clock -- -- -- --
TIME
< >
1.Clock:
The clock time is automatically set by reading the time data that is transmitted by local Digital
TV stations.
2.On/Off time:
The Off and On timers allow you to program the TV to switch On and Off at specific times
that you set. In order for this function to operate, the TV must be powered up (ie. mains
power switch on the TV is On) and in Standby mode. The Off and On timers have 6 different
setting options: Once, Every Day, Mon. ~ Fri., Mon ~ Sat., Sat. ~ Sun., and Sunday. You can
set the TV channel and volume settings for most options (except for the Once setting, where
the TV's last channel and volume settings will be used)
3
.
Sleep timer:
Press OK Key enter Sleep Timer Select Menu. And press
adjust Sleep Timer.
The Sleep Timer allows you to select from a range of pre-set times (between 10 minutes and
240 minutes long) that the TV will operate for before returning to the Standby state.
5.SPDIF Mode:
Press OK key to switch Auto or PCM. The SPDIF Mode option affects the format of the Coaxial digital
audio output from the socket on the rear of the TV. Unless you need to force the output format to
PCM, leave this setting in the Auto position.
