Assembly Instructions
5
1. Front Grill
2. Blade
3. Rear Guard Fixing Screws
4. Rear Grill
5. Fan Blade Shaft
6. Motor
7. Oscillation Control
8. Control Switch
9. Knob
10. Pipe
11. Base
12. Locating Ring
13. Base Locking Screw
The Fan head and the pipe are assembled.
Unscrew the Fastener & Ring and Base Locking Screw from the Pipe.
Insert the Pipe through the hole in the centre of the Base and twist into position.
Secure the Pipe to the Base with the Fastener, Locating Ring and Base Locking Screw, in that order. (see picture
above)
Fasten the Rear Grill onto the Motor with the four Rear Grill Screws provided.
Install the Fan Blade onto the Fan Blade Shaft and tightening the Blade Screw onto the shaft
Centre the Front Grill by aligning the logo on the grill Hub so it is horizontal and parallel to the floor. Then secure the
Front and Rear Grills completely together by snapping grill clips into place. Lastly, insert and tighten the Grill Locking
Screw at the bottom of the Rear Grill.
