GVA G204FFW15, Инструкция по эксплуатации

Страница: 10 / 20

Getting Started
Location
Locate the appliance
- Away from direct sunlight, which may affect the acrylic coating.
- Away from sources of heat (stove, heater, radiator, dishwasher, etc.), which may
increase power consumption.
- In an area without extreme cold ambient temperatures, which may affect cooling
performance.
- In a cool, well-ventilated area, without excessive moisture and high humidity.
Installing the appliance in the coolest area of the room will save energy consumption and
running costs.
To ensure correct operation, this appliance must not be located where the temperature
will be below 16
°
C or above 43
°
C.
Ensure there are no obstructions that could prevent the door from closing.
To level the appliance, adjust the levelling legs at the bottom of the appliance.
The appliance must have at least 50mm clearance between the rear of the appliance and
the wall, 25mm between the sides and wall, and the space above the top should be at
least 25mm. Ensure that there is enough spacing to open the door to 160
°
.
Before plugging in your new appliance, let it stand upright for approximately 2 hours. This
will allow the refrigerant gases to settle into the compressor and reduce the possibility of
a malfunction in the cooling system from handling during transportation.
The appliance is suitable for connection to 220-240VAC 50Hz supply. The appliance must
be plugged into a dedicated individual 220-240VAC main socket outlet.
Plug the appliance into an exclusive, properly installed and earthed wall outlet. Do not
under any circumstances cut or remove the third (ground) prong from the power cord. If
in doubt about your setup, direct any questions concerning power and/or grounding to a
certified electrician.
Do not use an extension cord or an adapter plug.
NOTE: After plugging the appliance into a wall outlet, allow it to cool down for at least 2 or
3 hours before placing food inside.
Do not store explosive substances such as aerosol cans with a flammable propellant in this
appliance.
Secure the supply cord behind the appliance. Do not leave it exposed or dangling to
prevent injury and accidental disconnection from the power supply.
This appliance is intended to be used in households and similar applications such as:
- staff kitchen areas in shops, offices and other working environment;
- by clients in hotels, motels and other residential type environments;
- farm houses;
- bed and breakfast type environments.
8
8