OUTPUT END:
(to end of line and
connector cap)
INPUT END:
(to power/data
equipment)
Modular LED Cove Lighting System
INSTALLATION GUIDE
GVA Lighting, Inc. 3400 Ridgeway Drive, #14 Missisauga, Ontario L5L 0A2
Tel: + 1 905 569 6044 Email: [email protected]
gvalighting.com
IG-HL-COVE, 16-11-21
|
Page 6 / 9
Specifications are subject to change without notice. Every effort has been made to ensure that the information provided in this manual is accurate.
GVA Lighting Inc. is not responsible for printing or clerical errors. Refer to www.gvalighting.com for additional information.
HL-COVE
2. FIXTURE INSTALLATION
2.1.
Lay out HL luminaires adjacent to the adjustable brackets. Ensure the input side of the first luminaire is facing the direction from which power is supplied.
2.2.
Connect luminaires to one another before installing them into the adjustable brackets.
CAUTION
Connectors need to be firmly engaged for the snap to work properly. An audible “CLICK” will be heard when snap is fully inserted. Failure to connect luminaires
correctly may result in fixture malfunction or damage.
2.3
. Install connector cap on last HL luminaire's output connector to protect from electric shock and to maintain seal.
WARNING
Failure to install the connector cap may result in equipment or property damage and personal injury.
