1200MM MOUNTING TRACK MOUNTING PATTERN
2400MM MOUNTING TRACK MOUNTING PATTERN
MINIMUM COVE DIMENSIONS
HARDWARE REQUIRED:
(supplied)
(per 1200mm bracket)
2 x ST4.2 x 25MM
PAN HEAD SCREW
(per 2400mm bracket)
4 x ST4.2 x 25MM
PAN HEAD SCREW
33.80mm
1.30in
36.50mm
1.43in
36.50mm
1.30in
54mm
2.13in
300mm
11.81in
600mm
23.62in
2 x
4 x FIXTURE BRACKETS
4.76mm
3/16in
10mm
0.39in
300mm
11.81in
150mm
5.9in
TYP.
300mm
11.8in
TYP.
8 x FIXTURE BRACKETS
300mm
11.81in
600mm
23.62in
TYP
4 x 4.76mm
3/16in
10mm
0.39in
300mm
11.81in
150mm
5.9in
TYP.
300mm
11.8in
TYP.
Modular LED Cove Lighting System
INSTALLATION GUIDE
GVA Lighting, Inc. 3400 Ridgeway Drive, #14 Missisauga, Ontario L5L 0A2
Tel: + 1 905 569 6044 Email: [email protected]
gvalighting.com
IG-HL-COVE, 16-11-21
|
Page 3 / 9
Specifications are subject to change without notice. Every effort has been made to ensure that the information provided in this manual is accurate.
GVA Lighting Inc. is not responsible for printing or clerical errors. Refer to www.gvalighting.com for additional information.
HL-COVE
1.A. MOUNTING TRACK ADJUSTABLE BRACKET INSTALLATION
1.A.1.
Using provided fasteners or mounting tape, install the Mounting Track following the hole pattern shown below.
WARNING
Use mounting hardware suitable for the mounting surface. If supplied hardware is not suitable, replace with similar sized hardware. Use of innappropriate hardware
may result in dismounting of the mounting profile and can result in equipment damage, injuries, and death.
NOTE
: For multiple continuous Mounting Track installations, place each assembly against each other to achieve even module spacing.
NOTE
: Mounting tape may be used if tool access is difficult or impossible.
