8
Installation - New Construction
CAUTION:
Make sure the power is switched off at the
service panel before starting installation.
NOTE:
Ceiling mount only.
1
Attaching the fan housing to the
ceiling joist
CAUTION:
Allow for the thickness of ceiling board used in
your application. Do not flush mount to the joist. The flange
should be flush with the bottom of the ceiling board.
□
If spacing between joists is 12 in. apart, use four long wood
screws (AA) to attach the fan housing (A) directly to the
joists from the bottom through the ceiling board.
AA
A
2
Attaching the fan housing to the
ceiling joist using suspension
brackets
□
If spacing between joists is 16 in. - 24 in., insert
suspension bracket 1 (C) into the bracket cover on the
duct connector side of the fan housing (A). Then, attach
suspension bracket 2 (D) and suspension bracket 3 (E) to
the back of the fan housing (A).
E
C
D
A
3
Securing the fan housing to ceiling
joist
□
Secure the fan housing (A) to the joist with suspension
brackets (D, E) using long wood screws (AA).
A
D, E
AA
4
Securing suspension brackets onto
the fan housing
□
Secure suspension brackets (D, E) to the fan housing (A) using
the two machine screws (BB) and secure suspension bracket
(C) to the other side of the housing using the machine screw
(BB).
D, E
BB
BB
