6
Pre-Installation (continued)
PLANNING INSTALLATION
Before beginning the product installation, make sure all parts are present. Compare parts with the package contents list and hardware
contents. If any part is missing or damaged, do not attempt to install the product.
WARNING:
Turn off the electricity at breaker box before
beginning installation.
NOTE:
Installation may vary depending on how the
previous bath fan was installed. Supplies necessary for the
installation of your bath fan are not all included. However,
most are available at your local home improvement or
hardware store.
1. Carefully remove the unit from the carton.
2. Check the area above the installation location to be sure that
wiring can run to the planned location, that duct work can be
run, and that the area is sufficient for proper ventilation.
3. Inspect duct work and wiring before proceeding with
installation.
4. Before installation, provide inspection and future maintenance
access at a location that will not interfere with installation
work.
5. You may need a second person’s help to install this fan; one
person on the attic side and one person on the room side.
TOOLS REQUIRED
Claw
hammer
Phillips
screwdriver
Flat
screwdriver
Utility knife
Safety goggles
Drill bits
Power drill
Duct tape
HARDWARE INCLUDED
NOTE:
Hardware not shown to actual size.
AA
BB
Part
Description
Quantity
AA
Long wood screws (M4 x 30 mm)
8
BB
Machine screws (M4 x 12 mm)
3
