Attach the seat
1. Pull the seat recline post upwards on
both sides.
2. Now adjust the posts to a 45 degree
angle towards the front of the stroller.
3. When attaching the seat, align the
connectors on each side of the stroller
seat above the recline posts. Once
aligned, simultaneously push the
connectors onto the recline posts until
you hear a “click” from both sides.
▲
WARNING
: Please make sure that
both sides have been attached properly.
Try lifting the seat off the chassis; if
either side moves, you need to push
down until you hear a “click”.
Attach the bumper bar
1. On both sides of the stroller seat, you
will find a black post with a grey button
on the outside. The front bumper bar is
to be pushed directly onto these two
posts. You should hear the bar “click”
into the proper position. Test the lock by
gently pulling up on the center of the bar.
The bumper bar should not pull off the
posts if it is properly locked into position.
There is no specific orientation for the
bumper bar. It can be installed in either
direction and will work properly.
Attach the canopy
1. Attach the canopy clamp onto the
seat frame on both sides by pressing
clamp firmly onto tubing.