Removing the seat fabric
1. Remove the seat from the stroller
chassis.
2. Undo all the Velcro straps around the
footrest.
3. Under the seat you will find a strap
that needs to be unbuckled.
4. Pull seat fabric upward off the seat
frame.
Using the optional carseat adaptor
1. Set the seat recline mechanisms to
the vertical position on both sides.
2. Align the carseat adaptor over the
recline mechanisms. Ensure that the
safety strap is on the side closer to the
handle.
3. Simultaneously push the connectors
onto the recline mechanisms until you
hear a “click” from both sides (see
image).
4. To remove adaptor, simultaneously
press buttons on the connectors and lift.
▲
WARNING
:
Please make sure that
both sides have been attached properly.
Try lifting the adaptor off of the chassis; if
either side moves, you need to push
down until you hear a “click”.
▲
WARNING
: Carseat adaptor is only to
be used in the horizontal position.