2
Dear Customer
You are now a user of a kitchen extractor hood of ZRW type. This hood has been designed
and manufactured specially with a view to satisfying your expectations and it will certainly
constitute a fitting element of a modern kitchen. The modern structural solutions and the
newest technologies used in production of this hood guarantee its high effectiveness and
good appearance.
Please read these instructions carefully before installing the hood. They will help you avoid
mistakes during installation and operation of the hood.
We wish you a lot of satisfaction from choosing our kitchen extractor hood.
NOTE: The manufacturer will accept no responsibility for any damage due to installation or
operation not conforming to these instructions.
1 Characteristics
ZRW kitchen extractor hood was designed to remove or neutralize kitchen fumes. It has to
be installed permanently over a gas or electric cooker. It requires installation of a conduit
discharging used air to the outside if working in fume removal mode. The conduit (a pipe
Ø120 mm) shall not be longer than 4-5 m. The hood can operate as an odour absorber
after installation of an active carbon filter. In such case a conduit discharging used air to
the outside is not necessary. The kitchen hood is an electrical appliance manufactured
according to class II of fire protection, equipped with a permanent supply cord and plug. It
has its own lighting and an exhaust fan which can be set to one of three rotational speeds.
2 Technical data
Power supply voltage
AC 230V 50 Hz
Fan
motor 1
Lighting
40
W
Number of grease filters
1
Number of speeds
3
Width (cm)
50, 60
Depth
(cm)
50
Height
(cm)
13
Mass (kg)
6 (60 cm)/4,8 (50 cm)
Air outlet (ø mm)
120
Capacity (m3/h)
320
Power consumption (W)
max. 135
Noise level (dBA)
max. 51
CE
WARNING!
HIGH VOLTAGE
REMOVE COVERS!
INSIDE IS A HIGH VOLTAGE!
Содержание ZRW
Страница 16: ......