PACKING AND MOVING
1. Unpack , repack and carry
2. Please memorize the position of each accessory of the appliance when
packing, repack the product and check it carefully before transportation.
3. Do not lift or pull the door or the door handle during transportation.
4. When moving, the appliance do not stope over 45 degrees (the angle to the
vertical direction). Please avoid strong vibration during transportation.
MAINTENANCE
The appliance should be maintained and cleaned frequently. For your safety,pull the plug out of the
socket before cleaning.
1. Interior maintenance
Clean the interior of the appliance with clean water or neutral soap.Scour it with clean water and
wipe it with a piece of dry cloth.
2. Maintenance of door gasket
It is easy to damage if the door gaskets are polluted by the stain like oil, sauce and etc., so it is
better to clean them carefully.
3. Outer maintenance
Wipe the dust with a piece of dry cloth ,clean it with neutral soap if necessary.
4. The displacement of interior light Uninstall the cover and replace the light with a screwing light
(E14 , 220V/10W), Consult the following pictures:
DEFROST
The heavy frost will influence the refrigerating of the appliance and increase the energy consumption.
Thus, defrosting is needed as the frost is as thick as 5 mm.
Processes of the manual defrost are listed as following: take all the food out of the compartment;
uninstall the drawers and shelves; unplug the electronic power cord; open the doors and wait for the
thaw; wipe up the water with dry cloth.
Warning
Do not use any other equipment or method to push the defrost process.
It may destroy the cooling system.
1
Pry the bolt on the thermostat away
from the lamp shade about 2 mm with
the tool.
2
Meanwhile take another side as
the center to ratote the lamp shade
outwards.
3
Take out the lamp shade along the
direction of the arrow.
4
Rotate and take out the bulb in
counterclockwise direction.
